|
|
10 inch
stainless steel deck plate Model SSP-1 $189.00 |
|
 |
|
SLIDE OVER PEDESTALS
Our slide overs adapt to
all existing seat pedestals regardless of height, thus allowing any of our
leaning posts to be used at the proper height without the installation of new pedestals
$149.00 |
|
|
A)
14"-23" Adjustable height |
$ 195.00 |
|
B) 30" Aluminum Fixed
height |
$ 195.00 |
|
C) 30" Stainless steel fixed
height |
$ 489.00 |
|
D) Plug in pedestal w /plate |
$ 189.00 |
|
E) Snap out deck plate w /post |
$ 195.00 |
|
|
F)
Snap out plate |
$ 95.00 |
|
G)
Split Ring set |
$ 69.95 |
|
H) 10 inch
stainless steel deck plate |
$189.00 |
| I)
Deck plate
flush 9" |
$ 69.95 |
|
J) Deck
mounting ring |
$69.95 |
|
| A)
Model SF-3T Teakwood $199.00 |
B)
Model SF-1 Aluminum $149.00 |
C)
Model SF-2P Polyethylene $169.00 |
|
Our footrests
fit around any existing pedestal and are completely height
adjustable. They also swing out of the way when standing in
front of your helmseat. These anodized aluminum footrests are
available in three styles as shown in the photos. They have a
ten inch radius from your pedestal and are available for 2 7/'8
in.., 3.5 in. and 4 in. diameter pedestals.
|
|
Our New 4 inch
Diameter Stainless Steel Pedestals |
4 inch diameter "A"
 |
4 inch diameter "B"
 |
4 inch diameter "C"
 |
|
A ). Gas
powered adjustable. height pedestal with a 22 to 32 in. height range
or anywhere in between. This work horse is fabricated in 316
stainless steel with a 4 in. diameter. Twelve in. diameter
base. Ideal for helmseat or rockett launcher applications.
model # SS4GA $1,249.00
B ) This
manual adjustable height 4 in stainless steel fabricated in 316 grade
material also features a height range of 22 to 32 in. Great
for any heavy duty seating or fishing requirement. Twelve
in. diameter base. model # SS4MA $1,049.00,
C )
4
inch diameter stainless steel pedestals (grade 316
stainless) is available up to 30 inches in height with a 12
inch diameter pedestal base. model # SS4-30 $749.00
|
Down
position |
Fully
extended |
| Looking for a pedestal to
covert your dinette to a berth? Well look no further!
Our two stage anodized aluminum, adjustable height pedestal
is just what you're looking for. The height ranges from 13"
to 29" allowing you to set it at exactly the height you
need. This pedestal also works beautifully for most helmseat
applications. Fits a standard 2 7/8" swivel. AJF-2 (shown
with a table mounting plate) $419.00 |
|
|
SHOCK ABSORBING PEDESTALS
BY SEASPENSION |
| A)
SPIDER POST - Shock Absorbing
pedestals are our best seller, and are
designed to accept your spider / slider
which fits over a 2-7/8" OD standard
pedestal tube. This allows 360"
swiveling. The round base is a standard
9 - 1/4 OD with a 6 hole bolt pattern.
Proper operating range is between 140 -
275 lbs total seated weight. Please
consult the factory for heavier or other
special applications. Spider post are
available in 20" 23" 26" and 29"
heights. $595.00 |
| B)
SOLO POST - this patented shock
absorbing pedestal is designed to be
mounted to all seats or a universal flat
bottomed seat slider for fore and aft
movement. The post swivels 360" with
auto lock forward facing feature. Proper
orientation is required for
installation. The round base is a
standard 9 1/4 OD with a 6 hole bolt
pattern. Proper operating range is
between 14 - 275 lbs total seated
weight. Please consult us for heavier or
other special applications. Solo
post are available in 8", 19", 22"
and 25" heights. $595.00 |
|
|
Stainless Steel
seat slide/swivel will adapt to all
conventional helmseats. (shown right)
Model # SW-3
$229.00 |
|
 |
| The track-lock seat slide is
adaptable to any existing helmseat and features full Delron
bearings on both the sliding mechanism and the swivel pedestal
insert. 2 7/8 in. and 2 3/8 in. sizes are available. These
slides feature double hard coat anodizing to insure many years
of trouble hard coat anodizing to insure many years of trouble
service. Our seat swivels are also fully anodized and include
full Deron bearing pedestal inserts |
| A) Flat Slide fits all existing helmseats and provides
5.5 in of back & forth movement $95.00 |
| B) FLAT ROTATING SLIDE fits all existing helmseats and
provides 5.5 in of back & forth movement as well as a full
360 degree locking rotation. $109.00 |
| C)
FOUR WAY SLIDE fits all existing helmseats and
provides 5.5 in of back & forth as well as side to side
movement. The solution for installing side by side helmseats
where available space is at a premium. $169.00 |
| D) STANDARD SEAT SLIDE fits all existing
helm seats,
prides 5.5 in of back & forth motion and is available for 2
- 7/8 in, 2-3/8 in pedestals $129.00 and 4 in pedestals $189.00 |
|
|
|
Adjustable Foam Shock |
 |
| |
|
Active Seat Suspension
System |
Shock Absorber System for standard seat
width and pedestal installations
Compact
size,, low height 13' x 7 1/2" x 2"
Mounting
holes 5" x 12 1/8" and 6" x 6"
Meets ABYC
-H31, Type A seating standards
Price $195.00 |
|
|
|
Voice
1-800-235-2628
or 1-860-669-6637
Fax
1-860-669-6982
41 Commerce Street, Clinton Connecticut USA 06413
|
|
Arrigoni Designs Privacy
Policy
Hosted, Developed
and Maintained by Information
Systems, LLC
|
