|
 |
|
Leaning Post
permanent backrest
-as shown: standard 40"l x 12"d, backrest cushion -13"h - custom sizes
available.
Item 40 - LPBW
$995.00 |
|
 |
|
SLIDE OVER PEDESTALS
Our slide overs adapt to
all existing seat pedestals regardless of height, thus allowing any of our
leaning posts to be used at the proper height without the installation of new pedestals
Slide over only (so-1) $149.00 |
|
10 inch
stainless steel deck plate Model SSP-1 $169.00 |
|
 |
|
Protect your
leaning post and rod holders from the weather and the
sun with our
NEW covers |
|
Cover for the
LPR - 40 $69.00
Item # LPR - 40C |
|
 |
|
NEW
impact absorber mats
(as shown above)
are perfect for all boats running in rough
water .They absorb over 50% of impact. These
non skid mats measure 16 in. X 32 in. and
fit nicely in front of leaning posts or
helmseats and especially useful in open bow
areas -
SAVE YOUR BACK !
$69.95
- white, blue or gray. |
|
|
|
Arrigoni
Premium Welded Leaning Posts |
|
Leaning Post
- 40'
|
L.P.- 40
(shown)
The perfect
choice when rod holders are not needed.
This 40 in. post is designed for center
consoles 21 ft. & larger Our 36 in.
model is also available and fits well in
smaller boats. Pedestals may be attached
at any dimension to accommodate hatch &
deck configurations. (custom sizes
always available)
LP-40 - $669.00
Dim. 40 in X 13 in. Wide
LP-36 -
$629.00
Dim. 36 in X 13 in Wide
Colors, Pure white, Off white or
Light gray -call for custom colors..
|
|
CUSTOM ORDERS
ARE NEVER A PROBLEM
JUST
GIVE US A CALL
1-800-235-2628 |
|
Leaning Post with Rodholders - 40'
|
L.P.R.- 40
(shown)
Our most
popular Leaning Post model is equipped with four
stainless steel rod holders and works
well on boats 21 ft. & larger. Pedestals
may be attached at any dimension to
accommodate your hatch or deck
configurations - all hardware is
provided. Offering all the same
features. Our LPR-36 is the perfect
choice for smaller boats and remember we
are always available to fabricate any
custom size. Colors, pure white, off
white & Light gray. Call for custom
colors.
LPR-40
$769.00 & LPR-36 $729.00
|
|
|
Leaning Post with Rodholders
40' (shown) With Wide
Cushion
|
This Leaning Post offers the same features as our
LPR-40 & 36in. models, but comes
with a deeper cushion for extra comfort
when sitting as well as standing.
LPR-40W - $869.00
Dim.40 in X
14in. Deep
LPR-36W - $829.00
Dim.36 in. X 14 in. Deep
|
|
MADE IN
AMERICA |
 |
|
Leaning
Post with Rodholders
40' Regular Cushion & Backrest
(shown)
Drop in
removable backrests in matching
upholstery are available for our LPR-40,
LPR-36 &
LPR-20 models. Great for extra comfort!
BR-40 $249.00
BR-36
$249.00
BR-20 $229.00
|
OPTIONAL BACK REST
CONSTRUCTED BY
ARRIGONI
DESIGN |
|
|
Leaning
Post - 20'
|
The
perfect choice when replacing only one
seat - also great for fly bridge
application. Our 20 in X 13in.D
dimension easily replaces any single
helmseat and again custom sizes are
always available.. Colors, Pure white,
Off white or Light gray. Call for custom
colors.
LP-20 $329.00
|
|
AMERICAN CRAFTSMAN'S SHIP ! |
|
Leaning
Post With Rod Holders - 20'
|
The
perfect choice when you want to replace
one of your center console seats with a
leaning post for yourself while leaving
a regular seat for your passenger. With
this unit you also get two extra rod
holders and our optional drop in back
rest is also available. Colors, Pure
white, Off white, & Light gray. Call for
custom colors.
LPR 20 - $429.00 -
Dim,. 20W X 13 D
|
|
Stainless Steel Grab Rails available for all models
OPTIONAL HANDLE
|
OPTIONAL HANDLE ON L.P.R.-20
Stainless steel handles as pictured
are available for all leaning post
models.
20 in. $39.00
36 in.
$49.00
40 in.
$49.00
|
|
OPT,
HANDLE ON L.P.R.-40
Stainless steel handles as pictured
are available for all leaning post
models.
20 in. $39.00
36 in.
$49.00
40 in.
$49.00
|
|
|
|
Pricing $649.00
Optional
Backrest
$229.00 |
|
 |
|
Our newest leaning
post model has been designed to conserve space in
smaller center console boats without sacrificing
comfort and utility. Only 35 inches long by 16
inches wide allows this model to fit easily in 15 to
18 foot boats.
It is available with
our slide over pedestal system which easily converts
your two existing short seat pedestals to a leaning
post or it can be ordered with standard 29 inch high
pedestals. Model # 35-LPRS
(shown
with two optional drink holder cups)
|
 |
|
The newest addition to our selection of
leaning posts is ours double sided bolster
configuration, Great for standing at your helm
or even better for stand up fishing when those
stripers hit. Standard models are LPD-1 $ 689
(40 in. X 14 in. wide) and LPD-2 $649.( 36 in.X
14 in. wide) Aluminum pedestals included. Custom
sizes and vinyl colors are always available.
Call us with your ideas !
|
|
|
Pedestal
Mounted Swing Back Seat |
|
 |
|
| Our
newest pedestal mounted swing back seat features
polyethylene construction with marine vinyl - smooth or
pleated as shown. The stainless steel mounted backrest
moves back and forth for forward or aft seating. Model
shown SBS-1, 40 inch. $1,295.00 Custom sizes always available. |
|
|
This
new model offers all the features of our SBS-1 swing
back seat as well as serving as a first class
leaning post while standing at your helm. Custom
sizes and colors are always available. Model shown
is 38 inches $1,395.00. Model SBS-1L
|
|
|
Optional Teakwood Frame
 |
Optional teakwood frames are available
20', 26' and
40-inch rod holder models as shown. These ruggedly constructed posts adapt to all existing helmseat pedestals by using our
slide over system or may be ordered with their own permanently mounted anodized aluminum
pedestals. These leaning posts are fabricated with maintenance-free polyethylene frames,
double stitched marine grade vinyl and stainless steel fasteners. Both single and double
width models are available with or without stainless steel rod holders as shown.
$995.00 (40-LPRT) |
|
Leaning Post Center Console Tackle Locker - 2 - $1,995.00 |
|
LPL-2 Center Console
Tackle Locker
Our newest
leaning post tackle locker is designed for the smaller center
console. Only 36 in. wide, it fits most 17' to 24' boats.
Besides it's maintenance free polyethylene construction, it
features four large drawers with dividers, two stainless rod
holders and is lockable. A 94 quart cooler fits nicely
underneath.. Options include a drop in backrest and a fold down
footrest. Dimensions: 36 " W x 16" D x 30" H. $1,995.00 TBR
Backrest $229.00 and FFR Footrest $129.00
|
|
Leaning Post Storage Locker
Custom sizes available
Stainless Steel Grab Rails available for all
models
Custom sizes available on all Leaning Posts |
| This ultimate space saver combines efficient drawer storage with a cushioned
leaning post and easily accommodates your large cooler. The high quality construction
includes epoxy laminate construction with polyethylene security doors and work surfaces.
Stainless steel hinges and hardware as well as four drawers are standard features.
This unit mounts easily on any
deck surface with polyethylene under framed and stainless steel fasteners.
Dimensions: 30 in. high x 39 in. wide x 18in. deep. Available with
optional side rod holders Custom sizes available. Cost
$2,095.00
(Item # LPL-1)
|
|
| Designed for open console
sportfishing boats, these posts are
designed as an alternative to your existing helmseats.(40-LPR as shown) We have many styles and
options available. Many boaters prefer the comfort of
the leaning post while at the helm. |
|
Neptune
TPF4 - $589.00 |
Neptune
-TPF3- w/backrest $889.00 |
|
Voice
1-800-235-2628
or 1-860-669-6637
Fax
1-860-669-6982
41 Commerce Street, Clinton Connecticut USA 06413 |
Arrigoni Designs Privacy Policy
Content Right
1998 - 2009 Arrigoni Design
Hosted, Developed
and Maintained by
Information
Systems, LLC |
