Boat Seat Swivels & Shock Absorbing Boat Seat Pedestal

 Stainless Steel and Aluminum Pedestals with Deck Mounting Hardware

smallnewOur 2019/2020 Boat Show appearances here

Seat Shock Absorbents for Boat Pedestal
A
14″-23″ Adjustable height
$219.00
B
30″ Aluminum Fixed height
$209.00
C
30″ Stainless steel fixed height
$589.00
D
Plug in pedestal w/plate
$189.00
E
Snap out deck plate
w/post
$239.00
F
Snap out plate
$95.00
G
Split Ring set
$79.00
H
10" diameter stainless steel deck plate
$209.00
I
Deck plate flush 9″
$79.00
J
Deck mounting ring
$79.00

______________________________________

Custom Cockpit Table

Our pedestals and custom cockpit table shown mounted on a 56 ft Carver Pilot House

______________________________________

 4 inch Diameter Stainless Steel and Aluminum Pedestals

4 Inch Stainless Steel Pedestals

A
4" diameter pneumatic adjustable height pedestal with 12" diameter base. Shown in stainless steel but also available in 6061T aluminum. SS4-a 22" to 32" $2545.00, SS4-b 18"to 28" $2395.00 AL 22"-32" or 18" to 28" $995.00 .
B
4" diameter, 30" high fixed height 316 stainless steel pedestal with 12" pedestal base. SS4-30 $1595.00. Available in 6061T Aluminum for $589. Model AL4-30.
C
Photo of our 4 " aluminum pedestal.
D
4" inch diameter gas assist, adjustable height 316 stainless steel pedestal with a 12" diameter base. 22" to 32".SS4-a $2545, SS4-b 18" to 28" $2395.00. Available in 6061T aluminum. $995. Height range of 18" to 28" or 22" to32"available.
E
4" 6061T aluminum locking swivel mount. SW4-1 $359.00
F
Pull out footrest for 4" pedestals. Black molded collar and foot plate. SFP-4 $379.00 Available for 2 7/8" and 3 .5' pedestals.
G
12" flush deck plate in 316 stainless steel. SFP12 $425.00 and 6061T aluminum AP-12 $169.00
H
4" slide & swivel mount with 316 stainless steel hub. $38900. SSL-1

___________________________

ajf-2-AStainless Steel Boat Pedestal

Looking for a pedestal to covert your dinette to a berth? Well look no further! Our two stage anodized aluminum, adjustable height pedestal is just what you’re looking for. The height ranges from 13″ to 29″ allowing you to set it at exactly the height you need. This pedestal also works beautifully for most helmseat applications. Fits a standard 2 7/8″ swivel. AJF-2 (shown with a table mounting plate) $429.00 ~ Black anodized $469.00

ajf-3-black

ajf-2-black

___________________________

pneumatic-bbpneumatic-aa

This pneumatic pedestal, fabricated from only the best 6061 anodized aluminum, automatically raises from 20″ to 30″, coffee table height to dining height with the release of the collar clamp. It’s perfect for cockpit tables, salon tables or fly bridge tables. The pedestal comes complete with a table mounting flange and either a recessed or raised (as shown) deck mounting plate. AJF-3  $349.00

___________________________

lift-table-aalift-table-bb

 Need to replace the hydraulic mechanism in your hi-lo table or maybe you would like to build your own table, This hi-lo lift assembly is designed to be built into any table base, lifts up to ninety pounds and is lever activated. Height range is 20″ to 30″ or anywhere in between.  TL-1  $539.00

 ___________________________

SHOCK ABSORBING PEDESTALS
BY SEASPENSION

PedestalPRINTforDisk

Series3000-abc

BenchPost-abcd

A) SPIDER POST – Shock Absorbing pedestals are our best seller, and are designed to accept your spider / slider which fits over a 2-7/8″ OD standard pedestal tube. This allows 360″ swiveling. The round base is a standard 9 – 1/4 OD with a 6 hole bolt pattern. Proper operating range is between 140 – 275 lbs total seated weight. Please consult the factory for heavier or other special applications. Spider post are available in  20″ 23″ 26″ and 29″ heights.  $795.00

B) SOLO POST – this patented shock absorbing pedestal is designed to be mounted to all seats or a universal flat bottomed seat slider for fore and aft movement. The post swivels 360″ with auto lock forward facing feature. Proper orientation is required for installation. The round base is a standard 9 1/4 OD with a 6 hole bolt pattern. Proper operating range is between 14 – 275 lbs total seated weight. Please consult us for heavier or other special applications.  Solo post are available in  8″, 19″, 22″ and 25″ heights.  $795.00

___________________________

Seat Slide

pedistal-slide-09The track-lock seat slide is adaptable to any existing helmseat and features full Delron bearings on both the sliding mechanism and the swivel pedestal insert. Available in 2 7/8″ or  2 3/8″ diameter. These slides feature double hardcoat anodizing to insure many years of trouble free service. Our seat swivels are also fully anodized and include full Delron bearing  inserts.

Stainless Steel seat slide/swivel will adapt to all conventional helmseats. (shown above) Model # SW-3 $269.00

slide-12-15

A)  Flat Slide will mount on any helmseat. It provides 5.5 ” of back & forth movement $119.00
B)  FLAT ROTATING SLIDE fits all  helmseats and provides 5.5″ of back & forth movement as well as a full 360 degree locking rotation. $139.00
C)  FOUR WAY SLIDE fits all  helmseats and provides 5.5″ of back & forth as well as side to side movement. The solution for installing side by side helmseats where available space is at a premium. $269.00
D)  STANDARD SEAT SLIDE fits all existing helm seats, provides 5.5″ of back & forth motion and is available for 2 7/8″, 2-3/8″ pedestals $129.00 and 4″ pedestals $219.00

___________________________

Stainless Steel Deck Plate
10 inch $189.00
12 inch $269.00
Model SSP-1
SLIDE OVER PEDESTALS
Our slide over system adapts to all existing 2 7/8"
pedestals regardless of
height. This allows any of our
leaning posts to be used
without the installation of new pedestals. Just remove your seats, place these slide-overs on top of your short pedestals and secure your cushion.
$179.00

___________________________

smallnewOur order Form – print it out / Fax / or Scan it in,
use our “Contact Us” section file attach system

___________________________