|
|
Covers Available For
All Chairs |
 |
Teakwood Bar Stool
Complete
with teak floor stand, foot rest an 28" Pedestal as shown $2,195.00
(TBS-1) |
|
 |
| This 12' diameter vinyl stool
is a traditional favorite for fly bridge use fits any
existing 2 7/8" diam. pedestal
$195.00 with swivel |
|
10 inch
stainless steel deck plate Model SSP-1 $169.00 |
|
 |
| Stainless Steel Folding Deck Chair - Heavy marine grade vinyl attached to a
1" Stainless steel frame. Dimensions: 30 1/2 x 26 1/2w x 20"d
$269.00 FDC-1 |
|
 |
|
Leaning Post Helmseat: This new seat gives you the benefit of a leaning
post as well as a helmseat. Fabricated of high quality marine grade vinyl,
it comes standard with a posi-lock slide / swivel that will go over any
standard pedestal. Dimensions: seat 18 w" x 24" D ( including back ). Item
# LP-4 $695.00 |
|
|
Upholstered
captains chair shown left with 16" Stainless portable stand & gimbal
$895.00
No. UDG-1P |
|
 Portable
Stands Available |
|
16" Stainless Portable Chair
Stand
$295.00 - No.16SSP |
|
24"
Aluminum Portable
Chair Stand
$295.00 - No.24AP |
|
30"
Aluminum Portable Chair Stand
$279.00 - No.30AP |
|
|
|
"New"
Chair Cover
fits Chair Model #, UC-1, FL-1, FL2, SBS-II and all
low profile marine helmseats
$59.00
model # UC-1C |
|
|
|
NEW Helm Seat on our NEW 4 inch Pedestal |
|
NEW from Arrigoni Design - our Professional Grade
Helm seat featuring a four inch adjustable
height aluminum pedestal assembly with pull
out footrest and commercial slide and
swivel. A reclining back with fold up self
leveling armrests provide the highest level
of comfort. Dimensions are 24 in wide arm to
arm, 30 in. high backrest with removable and
adjustable headrest. Available in any vinyl
or fabric color. Standard colors are white,
cream, kaki, black or any two tone.
Introductory
pricing complete with pedestal as shown
$2,900.00
Seat only to fit your existing
pedestal $1,995.00
|
| You'll experience hours of comfort in any sea. This all
teak 4 rung ladderback helm seat features a permanently
attached back for safety. A positive lock aluminum
slide eliminates annoying loosening and rattling. Seat and Back cushions are
removable for storage. We us stainless steel mounting hardware on all
chairs. Seat 18"w x 19"d Teak $2,195.00 -
(#HS-1)
polyethylene
$1,995.00 (#HS-1-P) |
| Arrigoni Design
Just a quick note to thank
you for tremendous service. I faxed an order on Tuesday
morning and it arrived at my house Wednesday afternoon,
unbelievable. I couldn't get it that fast if I drove
down after it. In the days of "customer beware" your
company is a breath of fresh air.
Have a great day
Jack |
|
 |
| When space is at
a premium on your bridge and you would like the
comfort and style of our teak ladderback
helmseats. This model makes it possible This
armless chair is only 16 in. wide and is
available with three or four rung ladderback and
matching seat and back cushions and is equipped
with our universal seat slide that fits any
existing pedestal. Model No. HS-1TA is priced
at $1,595.00. Optional semi gloss or gloss
urethane finishes are always available |
|
 |
|
|
These two HS-1
teakwood helmseats featuring our optional three rung ladderback
are installed on a Henriques 35 sedan owned by Neal Burko at
Brewer's Marina in Stratford, Conn.
|
|
Cherry |
Maple |
|
Our latest bar stool creation features
cherry & maple wood with a brilliant urethane finish , stainless
steel pedestal, matching cherry or maple adjustable footrest and
the ultraleather fabric of your choice. (shown with
Ultraleather Promessa Bronze) (CBS-3) Call for special
pricing.
|
|
|
 |
Teak
Bar Stool |
These solid burmese teak bar
stools are on ideal addition to your home or yacht. They
are designed for permanent mounting but may be equipped
with portable stands. Dimensions: 16" Diameter 30" High
$1,495.00 as shown with 29" aluminum pedestal and
teak covered footrest.
Seat cushions are available.
Available in 24" Height also. |
|
|
 |
|
This compact ergonomic design
provides great comfort and support with permanent closed
cell water proof foam cushions. Rotationally molded from
white UV resistant polyethylene and equipped with a
molded in back handle as an additional safety factor.
Ideal replacement seating on center consoles and smaller
open boats. Fits all 2 7/8 in or 2 3/8 in existing
pedestals. Slide and swivel hardware included.
Dimensions: arm to arm 23 in. X seat depth of 19 in. and
seat back hgt. of 24 in. Value priced at $349.00 (Model
DC-1) |
|
 |
|
DC-2 |
|
This compact ergonomic design provides great
comfort and support with permanent closed cell water
proof foam cushions. Rotationally molded from white
UV resistant polyethylene. Ideal
replacement seating on center consoles and smaller
open boats.
DC-2
seat is 19 in. wide arm to arm, 19 in deep & 14
in high. Cushions snap on and are removable
Pricing with our posi lock & swivel included
$189.00 #DC-2
|
|
 |
|
ULTIMATE COMFORT FOR TWO
(Model Mk-5)
Another innovative helmseat
from Arrigoni Design
$1,895.00
|
|
|
|
ULTIMATE
COMFORT FOR TWO (Model Mk-5) (shown above)
Another
innovative helmseat from Arrigoni Design
Our
companion helmseat offers you some
wonderful features such as fold up arms
for easy access, individually reclining
backrests and fully adjustable or
removable headrests. This seat easily
mounts on two pedestals or to any
existing flat surface (mounting hardware
included). Available colors
include, camel, off
white, pure white and black. Custom marine vinyl
colors available.
Dimensions:
42" arm to arm (inside seat 40"), seat
depth 19", back height 19" plus 6"
headrest. Introductory pricing $1,895.00
|
|
|
|
This Deluxe
Captains Chair Provides Maximum Cruising Comfort ! |
|
I
N T R O D U C T O R Y P R I C I N G $1,795.00
Model MK-4NB |
|
|
|
Model MK-4NB Our newest chair model features a reclining
back with adjustable or removable headrest and fold up
arms. The contoured seat base features our super memory
foam for the ultimate in support and comfort. This
helmseat comes equipped with our slide and swivel
assembly to fit any size pedestal or a flat slide system
for any fixed surface application. Dim. 24 in. arm to
arm OD, Height 24 in. & seat depth of 20 in.
INTRODUCTORY PRICING $1,795.00. White covers $95.00 |
|
|
This Deluxe
Captains Chair Provides Maximum Cruising Comfort ! |
|
Shown in camel color |
Pure white color |
Pure white color |
The
model MK-4 features include, fold up arm rests,
flip up front bolster for easy standing and more
available room between your steering wheel and
the seat, a FULL reclining seat back for
complete comfort as well as fully adjustable or
removable headrest. This seat is equipped with
our Track - lock slide swivel assembly which
will fit over any existing pedestal you have on
your boat no reinstallation needed. Available colors include,
camel, off
white, pure white and black. Custom marine vinyl
colors available.
Dimensions: seat width 18 in., back height 30
in. and overall depth 25 in. with adjustable
headrest.
Model
MK-4 $1,895.00, covers available
at $95.00
|
|
|
MK - 3
Shown
in off white color
MK - 3 $995.00 |
Shown
in pure white |
|
The
MK-3
features extreme
comfort with great back support and has fold up
side arms for easy slide in access. This seat is
equipped with our track-lock slide swivel and will
fit over any existing pedestal you have on your boat
- no reinstallation needed. - no reinstallation
required.
Available colors include, camel, off
white, pure white and black. Custom marine vinyl
colors available.
Dimensions: 20 inch wide seat, 20 inch high back and
25 inches deep
MK - 3 $995.00 and covers are
available at $59.95
|
|
The Ultimate MK6 FLIP-UP
|
MK-6
Shown above is simply the most comfortable flip up helmseat you
have ever sat in. Always standing at your helm, this
seat does the trick - simply pop up the front
bolster to create a leaning post or higher seat to
sit on This seat is equipped with our smooth slide
and swivel assembly allowing back & forth movement
of six inches or full rotation with a locking
mechanism. Available in white, off white or camel
marine vinyl - full two year warranty like all of
our other marine seats ! Dimensions are 24 in. wide
(arm to arm), 23 in high & 24 in deep. Introductory
pricing of $789.00 . Chair Cover $59.00
|
| A)
Model SF-3T Teakwood $195.00 |
B)
Model SF-1 Aluminum $149.00 |
C)
Model SF-2P Polyethylene $169.00 |
|
Our footrests
fit around any existing pedestal and are completely height
adjustable. They also swing out of the way when standing in
front of your helmseat. These anodized aluminum footrests are
available in three styles as shown in the photos. They have a
ten inch radius from your pedestal and are available for 2 7/'8
in.., 3.5 in. and 4 in. diameter pedestals.
|
|
|
 |
|
 |
|
Ideal for
dual helm seating on express cruisers.
Hand sewn cushions offer contemporary
styling. Mounts to box or side coaming
and included hardware allows seat to
fold down for access below deck.
Available in two sizes: Model SMH-1 20
inches, priced at $695.00 plus Shipping
& Handling and Model SMH-2, 28 inches,
priced at $795 plus Shipping & Handling.
|
|
|
|
The Baby Sea Rocker
$119.95
plus $8.00
shipping.
The Searock baby seat
is crafted to hang under any sturdy boat top
(yes, this includes the ribs of a bimini)
using a 4-point harness that attaches above
the seat and an additional stabilizer below
the seat. In the SearocK seat, my son
quickly took to the natural rocking motion
of the seas, and we enjoyed our day while he
enjoyed a snack and napped in a safe
environment protected from the sun. |
| The HS-II LP
feature a teak or polyethylene ladderback with a
removable snap-on cushion. The key feature to this chair
is the rollover bolster cushion. It cushions you while
standing and offers ultimate comfort as a helmseat. Seat
dimensions are 18"W (inside dimension) or 24" W (arm to
arm) X 26" D with a 16" H back. As with all our chairs
dacron covers are available. See the pedestal page for
one of several choices. This chair will mount over your
existing pedestal with the addition of a slide and
swivel. HS-II LP $795.00 |
|
|
|
|
HS-2 |
|
Shown with the
back cushion on |
|
|
Constructed on a platform of polyethelene with marine grade vinyl it uses a posi-lock
slide just as our full size HS-1 does. Aluminum arm & back supports
complete this package.
Seat Dimension 18 x 18,
$849.00
w /
optional gimbal for light fishing $69.00,
Cover $59.00
Footrest available $129.00
Pedestals optional |
|
|
UC-1
|
Our traditional,
comfortable Captain's chair is built on a polyethelene frame. This
eliminates any chance of the core rotting due to salt water exposure.
Our posi-lock slide allows you to move the chair forward and back as
well as swiveling 360 degrees. Aluminum arm and back rest supports and
top quality marine grade vinyl complete the package. Seat dimensions:
18"W x 18"D. $489.00
Convert our Captain's
chair to a light fishing chair with the addition of a portable stand
and a gimbal.
Cover available: $59.00
Foot rest available: $129.00
Pedestals Optional
|
|
SBS-II
Dual Facing Seat / Bolster |
| SBS - II Dual Facing Seat / Bolster - This
seat flips back or forward. It mounts on any flat surface or on any
pedestal with our Posi-lock Slide System. This seat also features
upholstered armed and a flip-up bolster - perfect when standing.
Item # SBS-II $519.00
Chair cover $59.00 |
|
 |
|
| Our
newest pedestal mounted swing back seat features
polyethylene construction with marine vinyl - smooth or
pleated as shown. The stainless steel mounted backrest
moves back and forth for forward or aft seating. Model
shown SBS-1, 40 inch. $1,595.00 Custom sizes always available. |
|
|
This
new model offers all the features of our SBS-1 swing
back seat as well as serving as a first class
leaning post while standing at your helm. Custom
sizes and colors are always available. Model shown
is 38 inches $1,695.00. Model SBS-1L
|
|
|
FL-1 Helmseat Position |
FL- 1 Leaning Post Flip
up Position |
|
An
exciting addition to the Arrigoni Line is our new Flip Up Helmseat. Features
include:
The front cushion hinges up,
converting the seat instantly to a leaning post providing comfort when
steering and standing.
The internal chair frame is made entirely of polyethylene. It is
finished with heavy duty marine vinyl and plush comfortable foam
padding.
This seat is only 23 inches wide and will fit on any existing pedestal
replacing your present helmseat. It comes equipped with our
posi-lock seat slide system which allows full 360 degree rotation as
well as backward and forward movement. $489.00
FL- 1 |
|
Voice
1-800-235-2628
or 1-860-669-6637
Fax
1-860-669-6982
41 Commerce Street, Clinton Connecticut USA 06413
 |
|
Arrigoni Designs Privacy
Policy
Hosted, Developed
and Maintained by
Information
Systems, LLC
|
